Videotec ULISSE MAXI - Manual (Page 11)

EN - English - I
nstruc
tions manual
9
4.2 Product markings
On the pan & tilt devices have a label complying with
CE markings.
Fig. 01
The label on the body shows:
• Model identification code (Extended 3/9 bar code)
• Power supply voltage (Volt)
• Frequency (Hertz)
• Absorbed current (Amps)
• IP weatherproof standard
• Serial number
4.2.1 Checking the markings
Before proceeding further with installation, make
sure the material supplied corresponds to the order
specification by examining the marking labels.
Never, under any circumstances, make any changes
or connections that are not described in this
handbook: the use of inappropriate appliances may
expose personnel and the system to serious safety
hazards.
4 Identification
4.1 Product description and type
designation
The ULISSE MAXI has been specifically designed to fit
some of the largest zoom lenses in the market. This
positioning system integrates a large-sized housing,
a high performance P&T head and telemetry receiver.
The unit guarantees an optimal camera position in
outdoor installations.
The rotation on the horizontal axis is continuous with
a variable speed up to 20°/s while the amplitude
on the vertical axis varies from +45° to -20° with a
max speed of 20°/s. The ULISSE MAXI controls the
functions of autopan and patrol with a tracking
accuracy of 0.02° for preset positions upon recall.
Patrol sequences can also be varied with different
speed settings in order to customize a perfect patrol
pattern.
The ULISSE MAXI also uses sensors on both Pan and
Tilt axis for exact positioning in any condition. The
unit is equipped with a thermostatically controlled
heater. The built-in wiper does not interfere with the
viewing range of the camera.
In addition to the OSD set-up, the system is equipped
with an RS232 interface allowing the possibility to
update to the latest firmware version
The positioning system is controlled through
a RS485/RS422. The telemetry signal can be
transmitted in an active way for chain configuration
of several units together. Multiple communication
protocols are embedded.
The range offers a version with a built-in video
compression module to allow IP control of all the PTZ
functions and full integration into a network system.
The positioning unit can be used in several kinds of
external installations, such as: harbour control, urban
settings, stadiums, industries, prisons or military
applications and perimeter surveillance.