Videotec ULISSE MAXI - Manual (Page 32)

EN - English - I
nstruc
tions manual
30
9.5 How to change text
Move the cursor to the parameter to be changed,
then confirm.
EDIT ZONE
------------------------
1 NR. : 1
2 START:+ 0.00
3 STOP :+ 0.00
4>TEXT :TXT AREA1
Fig. 65
The text editing screen will appear.
Symbol
↑
will position itself under the character that
can be edited while the cursor > positions itself to the
right of the character to be entered.
EDIT TEXT: AREA
------------------------
Text: TEXT AREA1
↑
>A B C D E F G ERASE
H I J K L M N SAVE
O P Q R S T U EXIT
V W X Y Z 0 1 abc
2 3 4 5 6 7 8
9 : . , ? ! &
+ - * / =
SPACE ← →
Fig. 66
You can move inside the menu using the joystick.
EDIT TEXT: AREA
------------------------
Text: TEXT AREA1
↑
>A B C D E F G ERASE
H I J K L M N SAVE
O P Q R S T U EXIT
V W X Y Z 0 1 abc
2 3 4 5 6 7 8
9 : . , ? ! &
+ - * / =
SPACE ← →
Fig. 67
9.4 How to change the numeric
fields
Move the cursor to the parameter to be changed,
then confirm.
EDIT PRESET
------------------------
1 NR. : 1
2 ENAB.: N
3>PAN : + 0.00
4 TILT : - 40.00
5 SPEED: 20.00
6 PAUSE: 5
7 TEXT : PRESET 001
8 GO TO PRESET?
Fig. 63
The first digit in the numeric field to be changed will
flash and the last line of the display will show the
accepted limits for the field. Move in the field (left
and right) and change the sign or the numeric value
(up and down).
EDIT PRESET
------------------------
1 NR. : 1
2 ENAB.: N
3>PAN : +000.00
4 TILT : - 40.00
5 SPEED: 20.00
6 PAUSE: 5
7 TEXT : PRESET 001
8 GO TO PRESET?
min:-180.00 max:+179.99
Fig. 64
After making the change, confirm. The cursor returns
to the left and the modified figure stops flashing.
The field will be forced to the minimum or maximum
allowed value if you try to insert a value outside the
limits.