Videotec ULISSE MAXI - Manual (Page 37)

EN - English - I
nstruc
tions manual
35
9.6.6.2 Manual Control Menu (Limits)
Once inside the Limits menu it is possible to set the
following parameters:
01. Pan Limits: Enables the limits of Pan.
02. Pan Start: Sets the start limit of Pan.
03. Pan End: Sets the end limit of Pan.
04. Tilt Start: Sets the start limit of Tilt.
05. Tilt End: Sets the end limit of Tilt.
LIMITS
------------------------
1>PAN LIMITS : N
2 PAN START : + 0.00
3 PAN END : + 0.00
4 TILT START : + 0.00
5 TILT END : + 0.00
Fig. 81
This is a dynamic self-configuration menu based on
che choice made and displays the parameters on
which it is possibile to operate.
9.6.6.3 Preset Menu
01. Edit Preset: Allows access to Edit Preset menu.
02. Utilities Configuration: Allows access to
Utilities Configuration menu
PRESET
------------------------
1>EDIT PRESET >
2 PRESET UTILITIES >
Fig. 82
06. Motions Recall: To access the submenu which
manages automatic load of the movements.
MOTION
------------------------
1>OFFSET PAN: + 20.00
2 MANUAL CONTROL >
3 PRESET >
4 PATROL >
5 AUTOPAN >
6 MOTIONS RECALL >
Fig. 79
9.6.6.1 Manual Control Menu
01. Maximum Speed: Sets the maximum manual
speed.
02. Speed With Zoom: When enabled, this
parameter automatically slows down the PAN &
TILT speed, based on the ZOOM factor.
03. Tilt factor: Sets the reduction factor of the tilt
axis manual speed.
04. Movement Limits: To access the Limits menu
MANUAL CONTROL
------------------------
1>MAXIMUM SPEED : 20.00
2 VEL. WITH ZOOM : N
3 TILT FACTOR : 2
4 MOVEMENT LIMITS >
Fig. 80