Videotec ULISSE MAXI - Manual (Page 47)

EN - English - I
nstruc
tions manual
45
To move around within the menu use the up and
down arrow keys, and confirm using the Enter key.
The Leave key is used to quit the submenu/menu.
j For a complete description of the functions
that can be set via OSM see "9.6 Configuring
the system", page 31.
9.7.3.2 Preset and load positions
j Before making these settings, we
recommend enabling Mouse PTZ control,
so that it is easier to move around in the
position to be saved.
Enter the Setup / Setup Camera Menu and select
the PTZ Preset tab.
Select the desired unit from the Media Source list
(e.g. ULISSE 3) and enable the Live View function.
Fig. 114
Move to the desired position using Mouse control on
the video window.
Edit one of the boxes for the various preset positions
(Enter some text, such as Position No.2) and then
confirm by clicking on the blue button at the side.
Enter other preset positions as required.
h On completion, click on Apply.
It is possible to set 5 different speeds for pan and tilt
and it is also possible to enable advanced functions
using the Action menu (which contains, for example,
the Autopan, Start, Stop commands etc.). If you
want to control the PTZ using the mouse, directly
from the video window, check Mouse PTZ in the
control panel. You can then use the mouse to control
both movements and zoom (Zoom + and - are
situated in the centre).
Mouse PTZ
Fig. 112
To set the configuration parameters of the pan & tilt
by means of OSM, enable the corresponding function
using the control panel.
OSD
Fig. 113