Es track 2 property, Es track 3 property, Send encryption counter – MagTek Bluetooth MagneSafe V5 Swipe Reader User Manual
Page 46
Bluetooth MagneSafe V5 Swipe Reader
38
This property is stored in non-volatile memory, so it will persist when the unit
is power cycled. When this property is changed, the unit must be reset (see
Command Number 2) or power cycled for these changes to take effect.
ES TRACK 2 PROPERTY
Property ID:
0x2E
Property Type:
Byte
Length:
1 byte
Get Property:
Yes
Set Property:
Yes
Default Value:
0xFF (use ES property)
Description:
This character is sent as the end sentinel for track 2 with any format. If the
value is 0 no character is sent. If the value is in the range 1 – 127 then the
equivalent ASCII character will be sent. If the value is 0xFF then the value of
the ES property will be used instead of this property.
This property is stored in non-volatile memory, so it will persist when the unit
is power cycled. When this property is changed, the unit must be reset (see
Command Number 2) or power cycled for these changes to take effect.
ES TRACK 3 PROPERTY
Property ID:
0x2F
Property Type:
Byte
Length:
1 byte
Get Property:
Yes
Set Property:
Yes
Default Value:
0xFF (use ES property)
Description:
This character is sent as the end sentinel for track 3 with any format. If the
value is 0 no character is sent. If the value is in the range 1 – 127 then the
equivalent ASCII character will be sent. If the value is 0xFF then the value of
the ES property will be used instead of this property.
This property is stored in non-volatile memory, so it will persist when the unit
is power cycled. When this property is changed, the unit must be reset (see
Command Number 2) or power cycled for these changes to take effect.
SEND ENCRYPTION COUNTER
Property ID:
0x30
Property Type:
Byte
Length:
1 byte
Get Property:
Yes
Set Property:
Yes
Default Value:
0x00 (don’t send Encryption Counter)
Description:
This property is used to designate whether or not the Encryption Counter is
send as part of a keyboard message. If the property is set to 0x00, the
Encryption Counter is not sent, neither is a field separator sent. If the property