Warranty and assistance – Campbell Scientific CD295 DataView II Dual Line Display User Manual

Page 2

Advertising
background image

Warranty and Assistance

The

DATAVIEW II (CD295) DUAL LINE DISPLAY is warranted by

Campbell Scientific, Inc. to be free from defects in materials and workmanship
under normal use and service for twelve (12) months from date of shipment
unless specified otherwise. Batteries have no warranty. Campbell Scientific,
Inc.'s obligation under this warranty is limited to repairing or replacing (at
Campbell Scientific, Inc.'s option) defective products. The customer shall
assume all costs of removing, reinstalling, and shipping defective products to
Campbell Scientific, Inc. Campbell Scientific, Inc. will return such products
by surface carrier prepaid. This warranty shall not apply to any Campbell
Scientific, Inc. products which have been subjected to modification, misuse,
neglect, accidents of nature, or shipping damage. This warranty is in lieu of all
other warranties, expressed or implied, including warranties of merchantability
or fitness for a particular purpose. Campbell Scientific, Inc. is not liable for
special, indirect, incidental, or consequential damages.

Products may not be returned without prior authorization. The following
contact information is for US and International customers residing in countries
served by Campbell Scientific, Inc. directly. Affiliate companies handle
repairs for customers within their territories. Please visit
www.campbellsci.com to determine which Campbell Scientific company
serves your country.

To obtain a Returned Materials Authorization (RMA), contact Campbell
Scientific, Inc., phone (435) 753-2342. After an applications engineer
determines the nature of the problem, an RMA number will be issued. Please
write this number clearly on the outside of the shipping container. Campbell
Scientific's shipping address is:

CAMPBELL SCIENTIFIC, INC.

RMA#_____

815 West 1800 North

Logan, Utah 84321-1784

For all returns, the customer must fill out a “Declaration of Hazardous Material
and Decontamination” form and comply with the requirements specified in it.
The form is available from our website at

www.campbellsci.com/repair

. A

completed form must be either emailed to

repair@campbellsci.com

or faxed to

435-750-9579. Campbell Scientific will not process any returns until we
receive this form. If the form is not received within three days of product
receipt or is incomplete, the product will be returned to the customer at the
customer’s expense. Campbell Scientific reserves the right to refuse service on
products that were exposed to contaminants that may cause health or safety
concerns for our employees.

Advertising