Campbell Scientific CD295 DataView II Dual Line Display - Manual (Page 20)

DataView II (CD295) Dual Line Display
2. After all changes are complete, Click Apply to send the new settings to the
DataView II. After the settings are applied, DevConfig will show the new
values of the Settings from the CD295.
3. If after editing a setting, you wish to discard the changes, Click Cancel.
DevConfig will show the current values of the settings, in order for you to
verify that the changes were discarded.
4. It is possible to return the DataView II to its factory default settings. To do
this, Click ‘Factory Defaults’.
4.2.1.4 Upgrading the Operating System (OS)
From time to time, new operating system(s) for the DataView II may be
released to correct errors in the operating system, or to add new functionality.
To take advantage of this, it is necessary to send the new operating system
(OS) to the DataView II.
1. If you need to send a Operating System to your DataView2, open the
‘Send OS’ tab in ‘Device Configuration’ and select the Send OS button at
the bottom of the window.
It is not necessary to ‘Connect’ using DevConfig to send an
operating system. NOTE
16