Avaya PARTNER-18D - Manual (Page 79)

6 Maintaining Your System
Changing System Settings 69
Quick Reference Guide
15 Tighten the screw on the lower front of the cover.
Changing System Settings
If you are upgrading to PARTNER ACS Release 1.1 or 2.0 or later from an earlier
release by using the PC Card upgrade, all of your system programming settings
are converted to work with the new release. However, you may want to consider
some additional programming for the features that are new in Release 2.0 and
later systems.
CAUTION:
Remove all other PC Cards from the processor before initiating an upgrade.
For more information on using the PC Card Software Upgrade, see “Using a PC
Card” on page 60 .
Changing the System Clock
You may need to change the system clock for daylight savings time, after a
prolonged power failure, or after a system reset. Use System Date (#101),
System Day (#102), and System Time (#103) to set the current date, day, and
time.
Adding Lines, Pools, and Extensions
As your business grows or changes, so do your needs for your PARTNER ACS.
As you upgrade to newer releases, you must program for new features. As you
expand, you can add lines, pools, and extensions to your system.
System Day (#102) is not required for Release 3.0 and later systems.
If you replace a module with a different type, be sure you check the
telephone and line connections and verify system and telephone
programming. In many cases, you may need to rearrange the
connections and/or change telephone or system programming.