Managing traffic classes, Creating a traffic class, Figure 43: traffic class tab – Allied Telesis AT-S62 User Manual
Page 144
Chapter 14: Quality of Service
Section II: Advanced Operations
144
Managing Traffic Classes
Traffic classes consist of a set of QoS parameters and a group of QoS flow
groups. This section contains the following procedures:
❑ “Creating a Traffic Class,” next
❑ Modifying a Traffic Class on page 148
❑ Deleting a Traffic Class on page 149
❑ Displaying the Traffic Classes on page 150
Creating a Traffic
Class
To create a traffic class, perform the following procedure:
1. From the Home Page, select Configuration.
2. Select the Services menu selection.
3. Select the Traffic Class tab.
The Traffic Class tab is shown in Figure 43.
Figure 43 Traffic Class Tab
The columns in the tab are defined here:
ID
The ID of the traffic class.
Description
A description of the traffic class.