Allied Telesis AT-S62 - Manual (Page 213)

AT-S62 Web Browser Interface User’s Guide
Section III: SNMPv3 Operations 213
Configuring the SNMPv3 Notify Table
You can create, delete, and modify an SNMPv3 Notify Table entry. See
the following procedures:
❑ Creating a Notify Table Entry on page 213
❑ Deleting a Notify Table Entry on page 215
❑ Modifying a Notify Table Entry on page 216
For reference information about the SNMPv3 Notify Table, see
Configuring the SNMPv3 Notify Table on page 213.
Creating a Notify
Table Entry
To create an entry in the SNMPv3 Notify Table, perform the following
procedure.
1. From the Home Page, select Configuration.
2. Select the Mgmt Protocols menu selection.
3. Select the SNMP Tab.
The SNMP Tab is shown in Figure 58 on page 186.
4. In the SNMPv3 section of the page, click the circle next to Configure
Notify Table. Then click Configure at the bottom of the page.
The SNMPv3 Notify Table Page is shown in Figure 71.
Figure 71 SNMPv3 Notify Table Page