Allied Telesis AT-S62 - Manual (Page 157)

AT-S62 Web Browser Interface User’s Guide
Section II: Advanced Operations 157
Configuring CoS
This procedure explains how to change the egress queue used to handle
untagged ingress packets on a port. This procedure can also be used to
override the priority levels in tagged ingress packets.
To configure CoS, perform the following procedure:
1. From the Home Page, select Configuration.
2. From the Configuration menu, select the Services menu option.
3. Select the CoS tab.
The CoS tab is shown in Figure 49.
Figure 49 CoS Tab
4. Click the port where you want to configure CoS. You can select more
than one port at a time. A selected port turns white. (To deselect a
port, click it again.)
5. Click Modify.