Allied Telesis AT-S62 - Manual (Page 160)

Chapter 15: Class of Service
Section II: Advanced Operations 160
The Scheduling tab is shown in Figure 51.
Figure 51 Queuing and Scheduling Tab
Note
The Configure Egress Weights section in the tab is explained in the
next procedure, Configuring Egress Scheduling on page 161.
4. In the Configure CoS Queues to Egress Queues section of the tab, click
the list for a CoS priority whose queue assignment you want to
change and select the new queue.
For example, to direct all tagged packets with a CoS priority level
of 5 to egress queue Q3, you would use the list in CoS 5 to PQ and
select Q3 - QoS PriorityQ 3.
5. If desired, repeat Step 4 to change the egress queue assignments of
other CoS priorities.
6. Click Apply.
7. To permanently save the change, click the Save Config menu option.