Nikon D810 User Manual
Page 139
115
To choose a metering option, press the c button and rotate the
main command dial until the desired setting is displayed in the
viewfinder and control panel.
c
button Main command
dial
A
Non-CPU Lens Data
Specifying the focal length and maximum aperture of non-CPU lenses
using the Non-CPU lens data option in the setup menu (0 229)
allows the camera to use color matrix metering when matrix is selected
and improves the accuracy of center-weighted and spot metering.
Center-weighted metering will be used if highlight-weighted metering
is selected with non-CPU lenses or if matrix metering is selected with
non-CPU lenses for which lens data have not been supplied. Note that
center-weighted metering may also be used if highlight-weighted
metering is selected with certain CPU lenses (AI-P NIKKOR lenses and
AF lenses that are not of type G, E, or D).
A
See Also
See Custom Setting b5 (Matrix metering, 0 317) for information on
choosing whether matrix metering uses face detection. For
information on making separate adjustments to optimal exposure for
each metering method, see Custom Setting b7 (Fine-tune optimal
exposure, 0 318).