Nikon D810 - Manual (Page 369)

345
1
Bracketing burst
If the Fn button is pressed while exposure, flash, or
ADL bracketing is active in single frame or quiet
shutter-release mode, all shots in the current
bracketing program will be taken each time the
shutter-release button is pressed. If white
balance bracketing is active or continuous release
mode (mode U, T or M) is selected, the camera
will repeat the bracketing burst while the shutter-
release button is held down.
4
+ NEF (RAW)
If image quality is set to JPEG fine, JPEG normal,
or JPEG basic, “RAW” will be displayed in the
control panel and an NEF (RAW) copy will be
recorded with the next picture taken after the Fn
button is pressed (the original image quality
setting will be restored when you remove your
finger from the shutter-release button). NEF
(RAW) copies are recorded at the settings
currently selected for NEF (RAW) recording in
the shooting menu (0 295). To exit without
recording an NEF (RAW) copy, press the Fn button
again.
L
Matrix metering
Matrix metering is activated while the Fn button is
pressed.
M
Center-weighted
metering Center-weighted metering is activated while the
Fn
button is pressed.
N
Spot metering
Spot metering is activated while the Fn button is
pressed.
4
Highlight-
weighted
metering
Highlight-weighted metering is activated while
the Fn button is pressed.
Option Description