Nikon D810 - Manual (Page 173)

149
White balance can be selected by pressing the U button and
rotating the main command dial until the desired setting is
displayed in the control panel.
U
button Main command
dial
Control panel
A The Shooting Menu
White balance can also be adjusted using the White balance option in
the shooting menu (0 290), which also can be used to fine-tune white
balance (0 151) or measure a value for preset manual white balance
(0 158). The Auto option in the White balance menu offers a choice
of Normal and Keep warm lighting colors, which preserves the warm
colors produced by incandescent lighting, while the I Fluorescent
option can be used to select the light source from the bulb types.
A Studio Flash Lighting
Auto white balance may not produce the desired results with large
studio flash units. Use preset manual white balance or set white
balance to Flash and use fine-tuning to adjust white balance.
A
See Also
When WB bracketing is selected for Custom Setting e6 (Auto
bracketing set, 0 338), the camera will create several images each
time the shutter is released. White balance will be varied with each
image, “bracketing” the value currently selected for white balance. See
page 139 for more information.