Nikon D810 User Manual
Page 243
219
3
Start shooting.
Highlight Start and press J. The first
series of shots will be taken at the
specified starting time, or after about
3 s if Now was selected for Start
options in Step 2. Shooting will
continue at the selected interval until
all shots have been taken.
A
During Shooting
During interval timer photography, the Q
icon will flash in the control panel.
Immediately before the next shooting
interval begins, the shutter speed display
will show the number of intervals
remaining, and the aperture display will
show the number of shots remaining in the current interval. At other
times, the number of intervals remaining and the number of shots in
each interval can be viewed by pressing the shutter-release button
halfway (once the button is released, the shutter speed and aperture
will be displayed until the standby timer expires).
Pictures can be played back while interval timer photography is in
progress. The monitor will turn off automatically about four seconds
before each interval. Note that changing camera settings while the
interval timer is active may cause shooting to end.
J
button