Nikon D810 User Manual
Page 188
Advertising
164
3
Select a preset.
Press the U button and rotate the sub-command dial until
the desired white balance preset (d-1 to d-6) is displayed in
the control panel.
4
Select direct measurement mode.
Release the U button briefly and
then press the button until the L
icon in the control panel starts to
flash. A spot white balance target
(r) will be displayed at the selected
focus point.
5
Position the target over a white or grey area.
While L flashes in the display, use
the multi selector to position the r
over a white or grey area of the
subject. To zoom the area around the
target in for more precise positioning,
press the X button.
U
button
Sub-command
dial
Control panel
Control panel
Advertising