Nikon D810 - Manual (Page 250)

226
❚❚ No Photograph
The camera will skip the current frame if single-servo autofocus
is in effect and the camera is unable to focus (note that the
camera focuses again before each shot). Shooting will resume
with the next frame.
D Time-Lapse Photography
Time-lapse is not available in live view (0 35, 49), at a shutter speed of
A or & (0 123), when bracketing (0 133), High Dynamic Range
(HDR, 0 184), multiple exposure (0 209), or interval timer
photography (0 216) is active. Note that because shutter speed and
the time needed to record the image to the memory card may vary
from shot to shot, the interval between a shot being recorded and the
start of the next shot may vary. Shooting will not begin if a time-lapse
movie can not be recorded at current settings (for example, if the
memory card is full, the interval or shooting time is zero, or the interval
is longer than the shooting time).
Time-lapse photography may end if camera controls are used or
settings are changed or HDMI cable is connected. A movie will be
created from the frames shot to the point where time-lapse
photography ended.