Nikon D810 - Manual (Page 233)

209
Follow the steps below to record a series of two to ten exposures
in a single photograph. Multiple exposures can make use of
RAW data from the camera image sensor to produce colors
noticeably superior to those in software-generated
photographic overlays.
❚❚ Creating a Multiple Exposure
Multiple exposures can not be recorded in live view. Exit live
view before proceeding. Note that at default settings, shooting
will end and a multiple exposure will be recorded automatically
if no operations are performed for 30 s.
1
Select
Multiple exposure.
Highlight Multiple exposure in the
shooting menu and press 2.
Multiple Exposure
A
Extended Recording Times
For an interval between exposures of more than 30 s, extend the
meter-off delay using Custom Setting c2 (Standby timer, 0 319). The
maximum interval between exposures is 30 s longer than the option
selected for Custom Setting c2. If the monitor turns off during
playback or menu operations and no operations are performed for 30 s
after the standby timer has expired, shooting will end and a multiple
exposure will be created from the exposures that have been recorded
to that point.