Nikon D810 - Manual (Page 502)

478
ADL bracketing 2 frames using selected value for one frame or 3–
5 frames using preset values for all frames
Exposure lock Luminosity locked at detected value with A AE-L/
AF-L
button
ISO sensitivity
(Recommended
Exposure Index) ISO 64 – 12800 in steps of 1 /
3
, 1 /
2
, or 1 EV. Can also
be set to approx. 0.3, 0.5, 0.7, or 1 EV (ISO 32
equivalent) below ISO 64 or to approx. 0.3, 0.5, 0.7,
1, or 2 EV (ISO 51200 equivalent) above ISO 12800;
auto ISO sensitivity control available
Active D-Lighting Can be selected from Auto, Extra high, High,
Normal, Low, or Off
Focus
Autofocus Nikon Advanced Multi-CAM 3500FX autofocus
sensor module with TTL phase detection, fine-
tuning, 51 focus points (including 15 cross-type
sensors; f/8 supported by 11 sensors), and
AF-assist illuminator (range approx. 0.5–3 m/1 ft
8 in.–9 ft 10 in.)
Detection range –2 – +19 EV (ISO 100, 20 °C/68 °F)
Lens servo • Autofocus (AF): Single-servo AF (AF-S); continuous-
servo AF (AF-C); predictive focus tracking
automatically activated according to subject
status
• Manual focus (M): Electronic rangefinder can be
used
Focus point Can be selected from 51 or 11 focus points
AF-area mode Single-point AF, 9-, 21-, or 51- point dynamic-area
AF, 3D-tracking, group-area AF, auto-area AF
Focus lock Focus can be locked by pressing shutter-release
button halfway (single-servo AF) or by pressing
A AE-L/AF-L button
Exposure