Nikon D2H User Manual
Page 124
112
Taking Photographs—Flash Photography
The following Speedlights can be used in non-TTL auto and manual modes.
If they are set to TTL, the camera shutter-release button will lock and no
pho to graphs can be taken.
Flash mode
SB-27
2
SB-24
SB-30
SB-22S
SB-22
SB-20
SB-16B
SB-15
SB-28
SB-26
1
SB-25
SB-11
4
SB-14
4
Speedlight
SB-23
3
SB-29
3
SB-21B
3
SB-29S
3
Non-TTL auto
A
✔
✔
✔
✔
✔
✔
—
Manual
M
Repeating fl ash
Rear-curtain sync
Red-eye reduction
REAR
✔
✔
—
✔
✔
—
—
✔
✔
5
✔
✔
✔
✔
✔
5
✔
✔
✔
✔
—
—
✔
—
✔
—
—
✔
—
—
✔
✔
FP high-speed sync
✔
—
—
✔
—
1 The SB-26 can be set to slave mode for wireless slave fl ash photography. When the wireless slave selector is set
to D, shutter speed will be set to under ½
00
s.
2 When an SB-27 is mounted on the D2H, the fl ash mode is automatically set to TTL, and the shutter-release will
be disabled. Set the SB-27 to A (non-TTL auto fl ash).
3 Autofocus is only avail able with AF-Mi cro lenses (60 mm, 105 mm, 200 mm, or 70–180 mm).
4 When using the SB-11 or SB-14 in A or M mode, use the SU-2 with an SC-13 sync cable. Although SC-11 and
SC-15 sync cables can be used, the fl ash-ready indicator will not appear in the viewfi nder and shut ter speed will
not be ad just ed automatically.
5 FP high-speed sync must be selected manually.
Use Only Nikon Flash Accessories
Use only Nikon Speedlights. Negative voltages or voltages over 250 V applied to the
ac ces so ry shoe could not only prevent normal operation, but damage the sync cir cuit ry
of the camera or fl ash. Be fore us ing a Nikon Speed light not in clud ed in the list on
these pages, con tact a Nikon-au tho rized ser vice rep re sen ta tive for more information.
ISO Auto
If a Speedlight is used when Custom Setting b1 (ISO auto) is on, sensitivity (ISO equiv-
a len cy) will be fi xed at the value selected by the user.