Nikon D2H - Manual (Page 133)

121
Taking Photographs—Interval Timer Photography
Intvl timer shooting
Select intvl*no. of shots
010x3=0030
Remaining (intvl*shots)
010x3=0030
Off
On
Start
SHOOTING MENU
No Photograph
Photographs will not be taken if:
• The self-timer is in operation or the previous photograph has yet to be taken
• The memory buffer or memory card is full
• The camera is unable to focus in single-servo AF (note that the camera focuses again
before each shot)
• The user is measuring a value for preset white balance or taking a reference photo
for Image Dust Off using the Dust Off ref photo item in the setup menu.
Pausing Interval Timer Photography
To pause interval timer photography:
1 Press the multi selector left or right to high-
light Start at the bottom of the interval timer
menu.
2 Press the multi selector up or down to select
Pause and press the button.
Interval time photography can also be paused by:
• Pressing the button between intervals.
• Turning the camera off (if desired, the memory
card can be replaced while the camera is off).
Interval timer photography will be paused
when the camera is turned on.
When shooting is paused, the start time will be reset to Now. A new starting
time can be selected as described in Step 2 of “Interval Timer Photography”
(
118). The interval, number of intervals, and number of shots can not be
changed. If interval timer photography is paused during shooting, any shots
remaining in the current interval will be cancelled.
1 Press the multi selector left or right to highlight Start at the bottom of
the interval timer menu (see above).
2 Press the multi selector up or down to select Resume and press the
button.
Intvl timer shooting
Select intvl*no. of shots
010x3=0030
Remaining (intvl*shots)
010x3=0030
Pause
Done
Start
SHOOTING MENU