Nikon D2H - Manual (Page 220)

208
Menu Guide—The Setup Menu
LCD Brightness
To adjust monitor brightness, highlight LCD
brightness in the setup menu (
206) and press
the multi selector to the right. The menu shown
at right will be displayed. Press the multi selector
up to increase brightness, down to decrease. The
num ber to the right of the dis play indicates the
cur rent bright ness level, with +2 the brightest set-
ting and –2 the darkest. Press the multi selector
to the right to complete the operation and return
to the set up menu.
Mirror Lock-up
This option is used to lock the mirror in the up po-
sition to allow inspection or cleaning of the low-
pass fi lter that protects the LBCAST image sensor.
See “Technical Notes: Caring for the Camera and
Battery” (
240).
OK
0
LCD brightness
SET UP
OK
Mirror lock-up
OFF OFF
ON Image sensor cleaning
SET UP
Highlight Mirror lock-up in the setup menu ( 206) and press the multi
selector to the right. Press the multi selector up or down to highlight an op-
tion, then press to the right to make a selection.
Option Description
OFF Mirror functions normally.
Image sensor
cleaning
When shutter is released, mirror is locked in up position and blink-
ing “– – – – – – ” is displayed in top control panel. Mirror will
return to down position when camera is turned off. To ensure
power is available to lower mirror, this option is only available when
camera is powered by EH-6 AC adapter.