Nikon D2H - Manual (Page 258)

246
Technical Notes—Specifi
cations
Autofocus
Detection range –1 – +19 EV (ISO 100 at 20 °C/68 °F)
AF-area mode Single-area AF, dynamic-area AF, group dynamic-AF, dy-
namic-area AF with closest subject priority
Focus lock Focus can be locked by pressing shutter-release button half-
way (single-servo AF) or by pressing AE-L/AF-L button
TTL phase detection by Nikon Multi-CAM2000 autofocus
module
Exposure
Metering
Three-mode through-the-lens (TTL) exposure metering
Matrix 3D color matrix metering supported with type G and D
lenses; color matrix metering available with other CPU lenses
and with non-CPU lenses if user provides lens data
Center-weighted Weight of 75% given to 6, 8, 10, or 13-mm circle in center of
frame, or weighting based on average of entire frame
Spot Meters 3-mm circle (about 2% of frame) centered on se-
lected focus area
Range
(ISO 100 equivalent,
f/1.4 lens, 20 °C/68 °F)
0 – 20 EV (3D color matrix or center-weighted metering)
2 – 20 EV (spot metering)
Exposure meter coupling Combined CPU and AI
Exposure control
Exposure modes
Programmed auto with fl exible program; shutter-priority
auto; aperture priority auto; manual
Exposure compensation –5 – +5 EV in increments of 1 /
3
, ½, or 1 EV
Bracketing Exposure and / or fl ash bracketing (2–9 exposures in incre-
ments of
1 /
3
, ½, 2 /
3
, or 1 EV)
Exposure lock Luminosity locked at detected value with AE-L/AF-L button
Shutter
Speed
30 – 1 /
8 0 0 0
s in steps of 1 /
3
, ½, or 1 EV, bulb
Electronically-controlled vertical-travel focal-plane shutter
Sensitivity 200 – 1600 (in steps of 1 /
3
, ½, or 1 EV), 3200, 6400 (ISO
equivalent); auto gain to ISO 1600 equivalent
White balance
Bracketing 2–9 exposures in increments of 1, 2, or 3
Auto (TTL white-balance with 1,005 pixels RGB sensor), six
manual modes with fi ne-tuning, color temperature setting