Nikon D2H - Manual (Page 73)

61
Taking Photographs—White Balance
Selecting a White Balance Preset
To set white balance to a preset value:
1 Highlight White bal. preset in the white
balance menu ( 52) and press the multi se-
lector to the right. The menu shown at right
will be displayed. (To return to the shooting
menu, press the
button.)
d-0 :
d-0 d-1
d-3
d-2 d d d d d d d d d d d
d-4 d-4 d-4 d-4 d-4 d 4 d d 4 4 d d-4 d d 4 4 d d-4
Set Select
SHOOTING MENU
2 Presets are identifi ed by an icon or thumbnail,
a name (d-0 – d-4), and a comment. Press the
multi selector up, down, left, or right to high-
light the desired preset. To select the high-
lighted preset and return to shooting mode
without completing steps 3–5, press the
button.
3 Press the center of the multi selector to display
the menu shown at right. To view options for
other presets, highlight the name of the cur-
rent preset (d-0
– d-4) and press the multi
selector right.
d-1 :
d-0 d-1
d-3
d-2 d d d d d d d d d d d
d-4 d-4 d-4 d-4 d-4 d 4 d d 4 4 d d-4 d d 4 4 d d-4
Set Select
SHOOTING MENU
OK
d-1
Set
Edit comment
Select image
Copy d-0
White bal.
White bal. preset
SHOOTING MENU
Selecting a White Balance Preset: the WB Button
At a setting of (White bal. preset), presets can also
be selected by pressing the WB button and rotating the
sub-command dial. The current preset is displayed in
the rear control panel while the WB button is pressed.