Nikon D2H - Manual (Page 212)

200
Menu Guide—Custom Settings
Custom Setting f2: Multi Selector
If desired, the multi selector can be used to ac-
tivate the exposure meters or initiate autofocus.
Highlight f2 Multi selector in the second level
of the CSM menu (
172) and press the multi
selector to the right. Press the multi selector up
or down to highlight an option, then press to the
right to make a selection.
OK Do nothing
Reset mtr-off delay
Initiate autofocus
f2 When multi selector is
pressed:
CSM MENU
Option Description
Reset mtr-off delay Pressing multi selector activates exposure meters.
Do nothing
(default)
Multi selector does not activate exposure meters or initiate
autofocus.
Initiate autofocus
In AF-S or AF-C mode, pressing multi selector activates expo-
sure meters. Camera focuses while multi selector is pressed.
Custom Setting f3: PhotoInfo/Playback
By default, pressing the multi selector up or down
during playback displays the other images on the
memory card, while pressing the multi selector
left or right changes the photo information dis-
played. These roles can be reversed using Custom
Setting f3. Highlight f3 PhotoInfo/Playback in
the second level of the CSM menu (
172) and
press the multi selector to the right. Press the
multi selector up or down to highlight an option, then press to the right to
make a selection.
OK
f3 Role of Multi Selector
in Full-Frame Playback
CSM MENU
Info /PB OFF
ON Info /PB
Option Description
Info
▲▼/PB
Press multi selector up or down to change photo info displayed,
left or right to display additional images.
Info /PB
▲▼
(default)
Press multi selector up or down to display additional images, left or
right to change photo info displayed.
▲
▲
▲
▲