Error displays/messages, 33 error displays/messages – Sony CDX-M850MP User Manual

Page 33

Advertising
background image

33

Error displays/Messages

Radio reception

Preset tuning is not possible.

• Store the correct frequency in the memory.
• The broadcast signal is too weak.

The stations cannot be received.
The sound is hampered by noises.

• Connect a power aerial control lead (blue) or

accessory power supply lead (red) to the
power supply lead of the car’s aerial booster.
(Only if your car has a built-in FM/MW/LW
aerial in the rear/side glass.)

• Check the connection of the car aerial.
• The auto aerial will not go up.

t Check the connection of the power

antenna control lead.

• Check the frequency.
• When the DSO mode is on, the sound is

sometimes hampered by noises.
t Set the DSO mode to off (page 26).

Automatic tuning is not possible.

• The local seek mode is set to “on.”

t Set the local seek mode to “off” (page

24).

• The broadcast signal is too weak.

t Perform manual tuning.

The “ST” indication flashes.

• Tune in the frequency accurately.
• The broadcast signal is too weak.

t Set to the monaural reception mode (page

24).

A programme broadcast in stereo is heard
in monaural.

The unit is in monaural reception mode.
t Cancel monaural reception mode (page

24).

RDS

The Seek starts after a few seconds of
listening.

The station is non-TP or has weak signal.
t Press (AF) or (TA) repeatedly until “AF

off” or “TA off” appears.

No traffic announcements.

• Activate “TA.”
• The station does not broadcast any traffic

announcements despite being TP.
t Tune in another station.

PTY displays “--------.”

• The current station is not an RDS station.
• RDS data has not been received.
• The station does not specify the programme

type.

Error displays

(For this unit and optional CD/MD changers)

The following indications will flash for about 5
seconds, and an alarm sound will be heard.

Blank

*

1

No tracks have been recorded on an MD*

2

.

t Play an MD with recorded tracks on it.

Error

*

1

• A CD is dirty or inserted upside down*

2

.

t Clean or insert the CD correctly.

• A CD/MD cannot play because of some

problem*

2

.

t Insert another CD/MD.

Failure

The connection of speakers/amplifiers is
incorrect.
t See the installation guide manual of this

model to check the connection.

High Temp

The ambient temperature is more than 50°C.
t Wait until the temperature goes down

below 50°C.

NO Disc

*

1

No disc is inserted in the CD/MD unit.
t Insert discs in the CD/MD unit.

NO Magazine

The disc magazine is not inserted in the CD
unit.
t Insert the magazine in the CD unit.

NO Music

*

2

A CD which is not a music file is inserted in
the MP3 playable CD unit.
t Insert a music CD in the MP3 playable CD

unit.

Offset

There may be an internal malfunction.
t Check the connection. If the error

indication remains on in the display,
consult your nearest Sony dealer.

Push Reset

The CD/MD unit cannot be operated because
of some problem.
t Press the RESET button on the unit.

continue to next page

t

Advertising