Sony XAV-60 - Manual (Page 56)

56
E:\#Data Disc\4164312221\41643122XAV60EUR\01GB02CD-EUR.fm masterpage:Left
XAV-60
4-164-312-22 (1)
Error displays/messages
If these solutions do not help improve the situation,
consult your nearest Sony dealer.
If you take the unit to be repaired because of disc
playback trouble, bring the disc that was used at the
time the problem began.
Cannot read.
• The unit cannot read the data due to some problem.
• The data is damaged or corrupted.
Cannot read disc. Disc may be corrupted.
• The disc is corrupted.
• The disc is incompatible with this unit.
• The disc is not finalized.
Disc Error
• The disc is dirty or inserted upside down.
t Clean or insert the disc correctly.
• A blank disc has been inserted.
• The disc cannot play due to a problem.
t Insert another disc.
• The disc is not compatible with this unit.
t Insert a compatible disc.
• Press Z to remove the disc.
Disc Reading...
The unit is reading all file/album (folder) information
on the disc.
t Wait until reading is complete and playback starts
automatically. Depending on the disc structure, it
may take more than a minute.
Error
USB device was not automatically recognized.
t Reconnect it again.
Hubs not supported.
USB hub is not supported on this unit.
Local Seek +/Local Seek –
The local seek mode is on during automatic tuning.
No AF
There is no alternative frequency for the current
station.
No playable data.
The disc does not contain playable data.
No SensMe™ data on device.
The connected USB device does not contain data for
the SensMe™ function, or the data has been moved to
an improper location in the USB device.
No TP
The unit will continue searching for available TP
stations.
Offset
There may be an internal malfunction.
t Check the connection. If the error indication
remains on in the display, consult your nearest
Sony dealer.
Output connection failure.
The connection of speakers/amplifiers is incorrect.
t See the supplied installation/connections manual to
check the connection.
Overcurrent Caution on USB
The USB device is overloaded.
t Disconnect the USB device, then change the source
by pressing (SOURCE/OFF).
t Indicates that the USB device is out of order, or an
unsupported device is connected.
Playback prohibited by region code.
The DVD playback is prohibited due to the different
region code.
Please push reset.
This unit or USB device cannot be operated due to a
problem.
t Press the reset button (page 14).
SensMe™ data Reading...
The unit is reading all data for the SensMe™ function
in the connected USB device.
t Wait until reading is complete. Depending on the
amount of data, etc., it may take time.
The connected USB device is not supported.
For details on the compatibility of your USB device,
visit the support site.
The SensMe™ data is corrupted.
The data for the SensMe™ function has a problem,
such as altered file name, information, etc.
USB device is not connected.
USB is selected as source without a USB device
connected. A USB device or a USB cable has been
disconnected during playback.
t Be sure to connect a USB device and USB cable.
USB Reading...
The unit is reading all file/album (folder) information
in the connected USB device.
t Wait until reading is complete and playback starts
automatically. Depending on the structure, it may
take time.
“ ” or “ ”
During reverse or fast-forward, you have reached the
beginning or the end of the disc and you cannot go any
further.
“ ”
The character cannot be displayed with the unit.