AMX NetLinx Integrated Controllers NI-3000 - Manual (Page 66)

NetLinx Security and Web Server
60 NetLinx Integrated Controllers
Security tab - Modify Group page
The Groups > Modify Group link allows an authorized user to select from a listing of available
groups (FIG. 38) and then modify the access rights for the selected group.
Add Group Entries (Cont.)
OK/Cancel • Press OK to accept any changes made within this tab and
incorporate the information into the target Master.
• Press Cancel to void any changes made within this tab, disable
the security configuration session, void any changes made to
the Master, and return the user to the empty Security tab.
A User represents a single potential client of the NetLinx Master, while a Group represents a
logical collection of users. Any properties possessed by groups (example: access rights, directory
associations, etc.) are inherited by all the members of the group.
FIG. 38 Security Tab - Modify Group
Modify Group Entries
Feature Description
Select New Group Provides a drop-down listing of the available groups.
• Initially, administrator is listed as a default group. Thereafter, the
last group accessed is then always shown.
• As more groups are added through the Add Group section of
the Security tab, those groups appear within the drop-down
selection.
• The checkbox for each access right is populated when a new
group is selected.
Terminal (RS232) Access This selection enables or disables Terminal Security Access for
the selected group (through the RS232 Program port).
Admin Change Password Access This selection enables or disables the group’s right to change the
administrator’s user passwords.
Note: Once the Administrator’s password has been changed, the
default password can no longer be used to gain access.
FTP Access This selection enables or disables FTP Access for the selected
group.