Resetting the unit, Detaching the front panel, Getting started – Sony CDX-MP30 User Manual

Page 9

Advertising
background image

9

Getting Started

Resetting the unit

Before operating the unit for the first time or
after replacing the car battery, you must reset
the unit.
Remove the front panel and press the RESET
button with a pointed object, such as a ball-
point pen.

Note
Pressing the RESET button will erase the clock
setting and some stored contents.

RESET button

Detaching the front panel

You can detach the front panel of this unit to
protect the unit from being stolen.

Caution alarm

If you turn the ignition switch to the OFF
position without removing the front panel, the
caution alarm will beep for a few seconds.
If you connect an optional amplifier and do not
use the built-in amplifier, the beep sound will
be deactivated.

1

Press (OFF)*.
CD playback or radio reception stops (the
key illumination and display remain on).

* If your car has no ACC position on the

ignition switch, be sure to turn the unit off by
pressing
(OFF) for 2 seconds to avoid car
battery drain.

2

Press (RELEASE), then pull it off towards
you.

Notes
• If you detach the panel while the unit is still

turned on, the power will turn off automatically
to prevent the speakers from being damaged.

• Do not drop or put excessive pressure on the

front panel and its display window.

• Do not subject the front panel to heat/high

temperature or moisture. Avoid leaving it in
parked cars or on dashboards/rear trays.

Tip
When carrying the front panel with you, use the
supplied front panel case.

(OFF)

(RELEASE)

continue to next page t

Advertising