Alpine SEC-8058 - Manual (Page 104)

104
English
Advanced
Operation
1
2
3
TX
PANIC
(SEA-8481)
Activating Anti Car-Jack
Mode (Method 3)
Should a situation arise where the user does
not activate anti-carjack mode when leaving
the vehicle, but requires anti-carjack mode
upon returning to the vehicle, the user may
use this method to activate Anti Car-Jack
mode.
Press and release the EXT2/EXT3 and EXT
SELECT buttons simultaneously. (When the
system is armed)
Within 15 seconds, press and hold the EXT1/
VALET button for at least 2 seconds to
activate the Car-jack Panic mode.
“ANTI-CARJACK PANIC” will be shown on
the display of the remote control transmitter.
Press and release the TX/PANIC button.
“ANTI-CARJACK DISARM” will be shown on
the display of the remote control transmitter.
Now the Car-jack mode is activated.
Notes:
•
When using the function, the Dip switch
(S502-1) on the SEA-8081 Main Unit must
be ON. Consult with the Alpine dealer.
• When driving the car, always release the
Car-jack mode.
(SEA-8481)
EXT2/EXT3 E
X
T
S
E
L
E
C
T
and/et/y
ANTI--
(SEA-8481)
ANTI--
3
2
1
E
X
T
1
/V
A
L
E
T