Alpine SEC-8058 - Manual (Page 46)

46
English
Basic Operation
Remote Controlled Dis-
arming
Press and release the TX/PANIC button.
“SYSTEM IS DISARMED” will be scrolled 3
times on the display of the remote control
transmitter.
When a sensor is responding in the Arming
mode, the sensor name and time will be
shown on the display of the remote control
transmitter.
* Scrolled 3 times
Disarm/Valet Switch Dis-
arming
Enter the vehicle.
Turn the ignition switch to the ON position.
Turn the Disarm/Valet switch to the ON
position.
Note: Steps 1 and 2 may be interchanged.
1
1
2
SYSTE
(SEA-8481)
TX
PANIC
1
ACC
OFF
ON
RUN
2
VALET
DOOR
PM 8:10
DOOR TRIPPED
HOOD/TRUNK TRIPPED
RADAR SENSOR TRIPPED
IMPACT SENSOR TRIPPED
OPTIONAL SENS. TRIPPED
RADAR SENS. 2 TRIPPED
IGNITION TRIPPED
*