Alpine SEC-8058 - Manual (Page 134)

134
Remote Control
(SEC-8448A)
English
1
1
(SEC-8448A)
EXT 1
VAL
Exiting Valet:
Push and hold the EXT 1/VAL button down
(when the system is in valet) until the remote
control LED illuminates (when the system is
in valet and the ignition OFF) for one second.
The Extension LED will flash twice, indicating
that the system is out of valet (disarmed).
Notes:
1. When the system is in the valet mode, the
extension LED will illuminate for two
seconds whenever the door is opened or
the ignition is turned off.
2. When exiting the Protected Valet mode,
the system will indicate this violation by
blinking the LED twice every three
seconds.
Extension LED
Témoin d'extension
Indicador de extensión
2