Alpine SEC-8058 - Manual (Page 40)

40
English
Basic Operation
Remote Controlled Arm-
ing
Remove the key from the ignition.
Exit from the vehicle and close all doors.
Press and release the TX button.
“SYSTEM IS ARMED” will be scrolled 3 times
on the display of the remote control transmit-
ter.
If there is a problem with a sensor after the
system is armed, the name of that sensor will
be the displayed on the remote control
transmitter. This feature is called "Faulty
Sensor Bypass". Please see page 216 for
further information.
* Scrolled 3 times
3
ACC
OFF
ON
RUN
1
2
3
TX
PANIC
SYSTE
(SEA-8481)
4
CHECK
CHECK DOOR
CHECK HOOD/TRUNK
CHECK RADAR SENSOR
CHECK IMPACT SENSOR
CHECK OPT SENSOR
CHECK RADAR SENSOR 2
*