Alpine SEC-8058 - Manual (Page 26)

26
English
Basic Operation
4
1
2
Registering the ID Code
of the Remote Control
Transmitter
Remove the key from the ignition.
Remove the cover of the SEA-8081 Main
Unit.
Turn the Disarm/Valet switch ON and hold it.
Press and release the Reset switch on the
SEA-8081 Main-Unit.
(The Extension LED will blink.)
Note: Do not press the Reset switch for
functions other than this.
Press and release the TX/PANIC button
corresponding to the remote control transmit-
ter you desire to register.
(When registered correctly, the siren blows
two times.)
Loose your hold of the Disarm/Valet switch.
3
VALET
ACC
OFF
ON
RUN
4
TX
PANIC
(SEA-8481)
5