Alpine SEC-8058 - Manual (Page 18)

18
English
Basic Operation
Initial System Start-Up
Press and hold the EXT1/VALET and EXT2/
EXT3 buttons simultaneously for at least 2
seconds. This will initialize the transmitter in
preparation for time setting.
Setting the Time
Press and hold the DATE button for at least 2
seconds. The time display will blink.
While the display is blinking, press and
release the EXT1/VALET button to set the
hour.
While the display is blinking, press and
release the EXT2/EXT3 button to change the
minutes setting. Press and release the DATE
button to exit this mode.
Notes:
•
The time cannot be set while the transmit-
ter is in Program mode.
• The time cannot be set when is
displayed.
• If a button is not pressed within 30
seconds, time setting stops.
1
1
E
X
T
1
/V
A
L
E
T
EXT2/EXT3
and/et/y
(SEA-8481)
2
3
1
1
PM 2:05
DATE
2
E
X
T
1
/V
A
L
E
T
PM 3:05
(SEA-8481)
(SEA-8481)
EXT2/EXT3
3
PM 3:06
(SEA-8481)