Alpine SEC-8058 - Manual (Page 158)

158
Using the CVA-1000
(sold separately)
English
Registering the ID Code
of the Remote Control
Transmitter
1 Enter the vehicle.
Turn the ignition switch to the ON
position.
2 Turn on the power of the CVA-1000.
Notes:
• Do not start the engine.
• Decrease the sound volume for the car audio.
Open the cover of the SEA-8081 Main Unit.
Press and hold the Disarm/Valet switch.
(Keep the switch held during the entire
coding process.)
Press and release the Reset switch on the
SEA-8081 Main-Unit.
Note: Do not press the Reset switch for
functions other than this.
The "Code Learn" screen will appear on the
CVA-1000.
Press and release the TX/PANIC button on
the remote control to be coded.
6
1
ACC
OFF
ON
RUN
2
3
VALET
4
5
6
TX
PANIC
(SEA-8481)
Security
MODE
CODE LEARNING MODE ENTERED
TO PROGRAM
NEW REMOTE CONTROL
PRESS TX BUTTON
CODE
LEARN