Reception controls, Indications during reception – Sony XAV-60 User Manual
Page 16
16
Reception controls
Touch the display if the reception controls are not shown.
No. Item
Touch to
1
“Source List”
open the source list. (page 11)
2
“ATT”
attenuate the sound. To cancel, touch again.
3
“Top”
open the source list. (page 11)
4
m/M
tune manually.
Touch and hold to skip frequencies continuously.
5
./>
tune automatically.
6
“Band”
open the band list and change the band.
7
“Receive Menu”
open the receive menu, which contains the following.
• “Mono”: Touch to activate the monaural mode if FM reception
is poor. To restore stereo reception, select “OFF.”
• “Local”: Touch to only tune into stations with stronger signal.
To tune normal stations, select “OFF.”
• “IF”: Touch to set to “Wide” to hear FM stereo broadcasts in
stereo and with full frequency reception. To narrow the
reception frequency automatically to eliminate noise, select
“Auto.”
8
“Preset List”
list up stored stations, or store stations. (page 21)
9
“PTY List”
open the PTY list. (page 22)
Indications during reception
A
Current source icon*
1
B
Band number, Preset number*
2
, Frequency/status
C
Volume level*
3
D
Setting status (CSO, EQ7, RBE)
*1 Appears only when the controls are shown.
*2 Appears only when the station stored in memory is
received.
*3 When ATT is activated,
appears.
ATT
Band
Receive
Menu
Preset
List
PTY
List
Top
12:00
15
Source List
1
4
5 6
2
3
7
8
9
ATT
Band
Receive
Menu
Preset
List
PTY
List
Top
12:00
15
Source List
C
B
A
D