Sony PFM-50C1 - Manual (Page 63)

9
(GB)
Location and Function of Parts and Controls
2 INPUT2 connectors
RGB/YUV (D-sub 15-pin): Connects to the RGB
signal or component (YUV) signal output of a
computer or a piece of video equipment.
This display also accepts an HD analog component
(Y/P
B
/P
R
) signal. See “Pin assignment” on page 51
(GB) when inputting a component signal.
AUDIO (Stereo minijack): Inputs an audio signal.
Connects to the audio output of a computer or a
piece of video equipment.
3 CONTROL S IN/OUT (Control S Signal Input/
Output) Connector (Minijack)
You can control multiple devices with a single remote
commander when connected to the CONTROL S
connector of a video device or other display. Connect the
CONTROL S OUT connector on this display to the
CONTROL S IN connector of the other device, and
connect the CONTROL S IN connector on this display
to the CONTROL S OUT connector of the other device.
4 REMOTE (RS-232C) connector (D-sub 9-pin)
This connector allows remote control of the display
using the RS-232C protocol. For details, contact your
authorized Sony dealer.
5 VIDEO connectors
The PFM-50C1E is not equipped with VIDEO
connectors. For the PFM-50C1E, composite video and
Y/C input can be input to the display when the BKM-
B10 video input adaptor (not supplied) is installed in
the display.
COMPOSITE IN (BNC-type): Connects to the
composite video signal output of a piece of video
equipment.
COMPOSITE OUT (BNC-type): Connects to the
composite video signal input of a piece of video
equipment.
Y/C IN (Mini DIN 4-pin): Connects to the Y/C
signal output of a piece of video equipment.
AUDIO IN (Stereo minijack): Inputs an audio
signal. Connects to the audio output of a piece of
video equipment.
Use the ferrite cores listed below, or compatible
models, to attach to the cables you connect to the
INPUT1 or INPUT2 RGB/YUV signal connectors.
SMF-400 (DSub-DSub 15P)
MTSB-15HKBB-18 (DSub 15P-BNC)
Connector Panel
1 INPUT1 connectors
RGB/YUV (D-sub 15-pin): Connects to the RGB
signal or component (YUV) signal output of a
computer or a piece of video equipment.
This display also accepts an HD analog
component (Y/P
B
/P
R
) signal. See “Pin
assignment” on page 51 (GB) when inputting a
component signal.
AUDIO (Stereo minijack): Inputs an audio signal.
Connects to the audio output of a computer or a
piece of video equipment.
4
5
INPUT 1
RGB /
YUV
A
UDIO
INPUT 2
CONTR
OL S
REMO
TE
RGB /
YUV
A
UDIO
IN
OUT
1
2
3
COMPOSITE
IN
OUT
Y/C IN
A
UDIO IN
VIDEO