Sony XDP-MU110 - Manual (Page 12)

12
Notes
• After you attach the strap to the cradle, pull
the strap gently to make sure that the strap
is securely attached to the cradle.
• Do not forcefully pull the cradle after
attaching the strap. Doing so may damage
your car.
3
Remove the cover from the suction cup
gently.
Note
• It may be difficult to remove the cover from
the suction cup as the adhesive strength of
the suction cup is strong.
4
Press down the suction cup gradually,
expelling the air under the suction cup
(
), and press the PUSH button firmly
enough to secure the cradle on the
dashboard (
).
Notes
• If the suction cup contains air, the adhesive
strength of the suction cup will be
weakened.
• Make sure that the suction cup is dry before
mounting the cradle.
Tip
• The suction cup may contain tiny holes.
This can occasionally occur in the
production process, and should not cause a
malfunction.
5
Turn the LOCK/RELEASE lever
counterclockwise 90 degrees to secure
the cradle on the dashboard.
Note
• Before turning the LOCK/RELEASE lever,
make sure that you have pressed the PUSH
button hard and expelled the air from under
the suction cup.
6
Connect the cradle cable.
Rotate the arm of the cradle to the
horizontal position, and connect the
cradle cable.
Notes
• Make sure that the
 marks on the
connector are visible, as shown in the
illustration, when connecting the cradle
cable.
• Do not use any cable other than the supplied
cradle cable.
Cover