Sony GDM-C520 - Manual (Page 20)

20
Calibrating the System----cont.
After you click on the “Calibrate” button, you will see this screen:
1
Center the Artisan™ Sensor over the large circle shown in the display screen. Press firmly on the sensor until the
suction cups have been secured to the glass of the display's screen.
2
Click on the “Start” button to begin calibration.
✍ Once started, the calibration process will take approximately ten minutes to complete. If you are simply updating your
display's calibration data, this process will take approximately 3 minutes.
Make sure that both the display and sensor are dry before calibration. Dampness on the sensor or on the display screen
may lead to inaccurate calibration.
✍