Sony GDM-C520 - Manual (Page 3)

3
Precautions
Installation
When connecting the Artisan™ Color Reference System, be sure that the Artisan™ Signal Cable (which connects the GDM-
C520 display to your computer) is properly connected, according to page 12 of this manual.
The Artisan™ Sensor can be connected to a USB hub (such as the Macintosh keyboard) instead of directly into the computer.
Calibration
The suction cups used in the Artisan™ Sensor, if pressed forcefully against the display screen, may scratch the screen glass.
When beginning calibration, press the sensor against the screen firmly, exerting even pressure in order to attach all suction
cups.
Remove the sensor by peeling one edge of the sensor off first, and then continuing the peeling motion until all suction cups
have been dislodged.