Sony DSC-F828 - Manual (Page 104)

104
Cutting movies
a Set the mode dial to .
b Select the movie you want to
cut with
b / B .
c Press MENU.
The menu appears.
d Select (Divide) with B , then
press the center of the multi-
selector. Next, select [OK] with
v , then press the center.
The playback of the movie starts.
e Decide on a cutting point.
Press the center of the multi-selector at
the desired cutting point.
When you want to adjust the cutting
point, select [c/C] (frame
forward/ rewind) and adjust the cutting
point with b/ B. If you want to change
the cutting point, select [Cancel]. The
playback of the movie starts again.
f When you have decided on a
cutting point, select [OK] with
v / V , and press the center of
the multi-selector.
g Select [OK] with v , then press
the center of the multi-
selector.
The movie is cut.
To cancel cutting
In Step 5 or 7, select [Exit]. The movie
appears on the screen again.
• You cannot cut the following images.
– Still images
– Movies not long enough to cut
– Protected movies
• You cannot restore movies once you cut them.
• The original movie is deleted when you cut it.
• The cut movie is recorded in the selected
recording folder as the newest file.
Deleting unnecessary
portions of movies
a Cut an unnecessary portion of
a movie.
b Display the portion of the
movie you want to delete.
c Press (delete).
The movie has not yet been deleted at
this point.
d Select [Delete] with v , then
press the center of the multi-
selector.
The movie currently displayed on the
screen is deleted.
Mode dial
Multi-selector ( v / V / b / B )
MENU
00:00:02 Divide
Dividing
Point
Cancel
OK
Exit
10/10 101
80 min