Sony DSC-F828 - Manual (Page 90)

90
g Press MENU.
h Select [OK] with B , then press
the center of the multi-
selector.
The - mark turns white and the
selected image is protected.
To cancel the protection
In Step 4, select [Cancel], or in Step 8,
select [Exit].
To release protection
In Step 5, select an image for which you
want to release protection with v/V/b/B
and press the center of the multi-selector.
The - mark turns gray and repeat this
operation for all the images for which you
want to release protection. Then, press
MENU, select [OK], and press the center of
the multi-selector.
To protect all the images in the
folder
In Step 4, select [All In This Folder], then
press the center of the multi-selector. Next,
select [On], then press the center.
To release protection of all the
images in the folder
In Step 4, select [All In This Folder], and
press the center of the multi-selector. Then
select [Off], and press the center.
Changing image size
– Resize
Mode dial:
You can change the image size of a
recorded image, and save it as a new file.
You can resize to the following sizes.
8M, 5M, 3M, 1M and VGA.
The original image is retained even after
resizing.
a Set the mode dial to .
b Display the image you want to
resize with
b / B .
c Press MENU.
The menu appears.
Mode dial
Multi-selector ( v / V / b / B )
MENU