Getting started, Charging the battery pack – Sony DSC-F828 User Manual

Page 14

Advertising
background image

14

Charging the battery pack

,

Open the battery/“Memory
Stick” cover.

Slide the cover in the direction of the arrow.

• Be sure to turn off your camera when

charging the battery pack (page 18).

Your camera operates with the
“InfoLITHIUM” NP-FM50 battery pack (M
Series) (supplied). You can use only M Series
battery pack (page 146).

,

Install the battery pack, then
close the battery/“Memory
Stick” cover.

Insert the battery pack with the b mark
facing toward the battery compartment as
illustrated.
Make sure the battery pack is firmly
inserted all the way, then close the cover.

The battery pack is easily inserted by pushing
the battery eject lever at the front of the battery
compartment to the front side.

,

Open the jack cover and
connect the AC Adaptor
(supplied) to the DC IN jack of
your camera.

Open the cover in the arrow direction as
illustrated above. Connect the plug with the
v mark facing up.

Do not short the DC plug of the AC Adaptor
with a metallic object, as this may cause a
malfunction.

Clean the DC plug of the AC Adaptor with a
dry cotton bud. Do not use the dirty plug. Use
of the dirty plug may not properly charge the
battery pack.

2

1

1

3

2

2

Battery eject
lever

b

mark

3

Jack cover

DC plug

AC Adaptor

Getting started

Advertising