Sony DSC-F828 - Manual (Page 80)

80
b Press MENU.
The menu appears.
c Select [Mode] (REC Mode) with
b / B , then select [RAW] with v .
d Shoot the image.
You can do the next shooting after
“Recording” disappears from the
screen.
To return to normal mode
In Step 3, select [Normal].
• To reproduce the RAW data file using a
computer, the exclusive software is required.
Install the exclusive software on the supplied
CD-ROM (Image Data Converter) to your
computer. Since the RAW data file is a special
kind of file, general software cannot open the
RAW data file.
• The JPEG image is also recorded in the image
size selected by the Image Size setup (page 24).
(However, [3:2] cannot be selected.) RAW data
images are recorded in [8M] size.
• Writing data takes more time than in normal
recording mode.
• Digital zoom cannot be used.
• For the number of images that can be recorded,
see pages 134, 136.
Shooting still images
in TIFF mode
– TIFF
Mode dial: / P / S / A / M / SCN
Used when you record an image in
uncompressed file format. The image
quality does not deteriorate. Images
recorded in this mode are suitable for fine
printing. A compressed JPEG format image
like that recorded in normal shooting is
recorded at the same time.
a Set the mode dial to , P, S,
A, M or SCN.
b Press MENU.
The menu appears.
c Select [Mode] (REC Mode) with
b / B , then select [TIFF] with v /
V .
d Shoot the image.
You can do the next shooting after
“Recording” disappears from the
screen.
To return to normal mode
In Step 3, select [Normal].
• JPEG images are also recorded in the image
size selected by the Image Size setup (page 24).
Uncompressed (TIFF) images are recorded in
[8M] size except when [3:2] is selected.
• Writing data takes more time than in normal
recording mode.
• For the number of images that can be recorded,
see pages 134, 136.
Shutter button
Mode dial
MENU Multi-selector
(
v / V / b / B )