Sony DSC-F828 - Manual (Page 65)

65
Ad
vance
d s
til
l i
m
ag
e sh
oot
in
g
c Select [ISO] with b , then select
desired setting with v / V .
Choose from [800], [400], [200],
[100], [64], or [Auto].
To return to normal mode
In Step 3, select [Auto].
• To reduce camera shake, select a large number.
You can shoot a subject with higher shutter
speed.
• When selecting a large number, the image
becomes noisy. To give priority to image
quality, select a small number.
Choosing an auto
focus method
You can set the AF range finder frame and
the AF mode.
AF range finder frame
The AF range finder frame selects the focus
position according to the subject position
and size.
AF Mode
The AF mode is set automatically when the
camera starts and stops focusing on a
subject.
Choosing a focus range
finder frame
– AF range finder
Mode dial: P/S/A/M/SCN/
Multipoint AF ( )
The camera calculates the distance in five
places to the top, the bottom, the left, the
right, and in the center of the image, letting
you shoot using the auto focus function
without worrying about the image
composition. This is useful when it is
difficult to focus on the subject because it is
not in the center of the frame. You can
check the position where the focus was
adjusted using the green frame.
The default setting is Multipoint AF.
Center AF ( )
The AF range finder is only the center of the
frame. You can shoot in desired image
composition using the AF lock method.
Mode dial
Multi-selector
(
v / V / b / B )
FOCUS