Shooting with shutter speed priority mode, Shooting with shutter speed, Mode dial: s – Sony DSC-F828 User Manual

Page 55: Cshoot the image

Advertising
background image

55

Ad
vance

d s
til

l i

m

ag
e sh

oot

ing

Shooting with shutter
speed priority mode

Mode dial: S

You can adjust the shutter speed manually.
If you shoot a moving subject at a higher
shutter speed, it appears as if frozen on the
image. At a lower shutter speed, the subject
appears as if it flowing.
Aperture value is automatically adjusted to
attain correct exposure according to the
brightness of the subject.

a

Set the mode dial to S.

b

Select a shutter speed with the
command dial.

The shutter speed can be selected from
1/2000 to 30 seconds.
If you select 1/25 second or slower
shutter speeds, the NR slow shutter
function is automatically activated. In
such cases, “NR” is indicated at the
left of shutter speed indicator.

c

Shoot the image.

Shutter speeds of one second or longer are
indicated with ["] after the value, such as 1".

If the proper exposure is not obtained after
making the settings, the setting value indicators
on the screen flashes when the shutter button is
pressed halfway down. You can shoot in this
condition, but we recommend that you adjust
the flashing values again.

The flash is set to (Forced flash) or

(No

flash).

When the shutter speed is high, the amount of
flash light may be insufficient even if you
strobes the flash.

You can adjust the exposure value (page 59).

High shutter speed

Slow shutter speed

Mode dial

Command dial

Shutter button

8M

F2.0

0

EV

S

98

FINE

MAF

101

80

min

250

200

320

S

NR slow shutter

The NR slow shutter mode reduces noise
from recorded images, providing clear
images. When using shutter speeds of 1/25
second or slower, the camera automatically
works the NR slow shutter mode and “NR”
is indicated next to the shutter speed
indicator.

Press the shutter
button fully down.

r

Then the screen
turns black.

r

Finally, when
“Processing”
disappears, the
image has been
recorded.

To eliminate the effects of vibration, use of
a tripod is recommended.

When a slow shutter speed is set, the
processing may take some time. This is
because the camera works to remove noise
during the time set by the shutter speed
setting.

F2.8

NR

2''

Capturing

Processing

Advertising