Sony DSC-F828 - Manual (Page 62)

62
Shooting with the
exposure fixed
– AE LOCK
Mode dial: P/S/A/SCN/
You can lock the exposure before
recomposing the image. This is useful when
the contrast of the subject and its
background is extremely high or you shoot
a backlit subject.
a Set the mode dial to P, S, A,
SCN or
.
b Target the subject for which
you want to meter the
exposure, then press AE
LOCK.
The exposure is fixed and the
indicator appears.
c Recompose the image and
press and hold the shutter
button halfway down.
The focus is automatically adjusted.
d Press the shutter button fully
down.
To release AE LOCK
Carry out one of the followings:
• Press AE LOCK again after Step 2.
• Release your finger from the shutter
button after Step 3.
• Press down the shutter button in Step 4.
Mode dial
Shutter button
AE LOCK
8M
F2.0 250
98
FINE
MAF
101 80 min
P
Shooting techniques
The camera automatically adjusts the
exposure according to the subject. If you
change the composition of your shot, the
exposure may be changed, such as by
changes in the brightness of the background.
In such cases, use the AE lock function. You
can shoot freely, regardless of the brightness
of the subject.
To determine the exposure, measure the
exposure of the desired portion of the
subject using either center-weighted
metering or the spot metering function.
Press AE LOCK to lock the exposure, and
then recompose the picture and shoot.
m
Portion of the image
used to determine the
exposure