Sony DSC-F828 User Manual
Page 128
128
Others
You cannot print images.
• The camera does not connect to the printer.
• The printer is not turned on.
• Movies and images recorded in RAW mode
cannot be printed.
• Images modified with a computer or images shot
using other than this camera may not be able to
be printed.
p Check that the camera and the printer are properly connected
using the USB cable.
p Turn on the printer. For further information, refer to the
operating instructions supplied with it.
—
—
Printing is canceled.
• You disconnected the USB cable before the
(Not disconnect USB cable) mark
disappears.
• You switched the
/CF switch while
printing.
—
—
You cannot insert the date
or print images in the
index mode.
• The printer does not provide these functions.
• The date may not be inserted in the index mode
depending on the printer.
p Consult with the printer manufacturer whether the printer
provides these function or not.
p Consult with the printer manufacturer.
“---- -- --”is printed on the
date-inserted part.
• The recording date data is not recorded on the
image.
p The images that do not have the recording date data cannot be
printed with the date inserted. Set [Date] to [Off] and print it.
Symptom
Cause
Solution
The camera does not
work, no operations can
be performed.
• You are not using an “InfoLITHIUM” battery
pack.
• The battery level is low or zero (The
indicator appears.).
• The AC Adaptor is not connected securely.
p Use an “InfoLITHIUM” battery pack (page 146).
p Charge the battery pack (page 14).
p Connect it securely to the DC IN jack of the camera and to a wall
outlet (wall socket) (page 17).
The power is on, but the
camera does not work.
• The internal system is not working properly.
p Remove, and then, after one minute, reinstall the battery pack
and turn on the camera. If this does not work, press the RESET
button located inside the battery/“Memory Stick” cover with a
pointed object, then turn the power on again. (This will clear the
date and time settings, etc.)
Symptom
Cause
Solution